WATCHMATE XB-6000 HIGH PERFORMANCE AIS TRANSPONDER WITH BUILT-IN NMEA 2000 GATEWWAY
Complete Class B AIS Transponder
WatchMate XB-6000 is a Class B AIS transponder with a two channel parallel receiver and transmitter. It transmits your vessel position and details and receives the same kind of information from other vessels with AIS transponders.
The AIS data is sent every few seconds and includes information such as course, speed, latitude, longitude, and heading. Static information about the vessel is sent every few minutes and includes the name, type of vessel, length, beam, draft, etc.
High speed 5Hz GPS navigation and built-in GPS Antenna
A built-in 50 channel GPS receiver (with WAAS/EGNOS) and its own internal GPS antenna eliminates the need to install an external GPS antenna in many situations.
However, it also includes a powerful external antenna for those installations that require it. The external antenna can be pole mounted on standard 1" threaded tubing or mounted on a flat surface with the included base. The cable has a small connector, about the same diameter as the cable, to facilitate easy routing through small holes.
The fast 5Hz GPS update rate results in higher resolution and smoother tracks on your plotter or MFD, even during high speed maneuvers. It can be used as a source of GPS data for the entire NMEA 2000 network
Other innovative features
Ultra-low power consumption
Designed for minimal power consumption the WatchMate XB-6000 is extremely well suited for energy conscious vessels.
Low power operation is particularly important on a long voyage when charging from solar or wind. The XB-6000 consumes less power than other AIS transponders even with the NMEA 2000 gateway operating!
Positive Identification
You'll have each vessel's name and call sign and others using AIS will also have yours. If you wish to call another vessel you will be able to ensure you are talking to the correct vessel. This is very important when operating in busy areas or in bad weather when visibility is reduced.
Silent Mode Control via PC, Mac or an external switch
The XB-6000 can be put into silent mode. When in this mode, the AIS receivers and GPS continue to operate normally. The only change is transmissions are inhibited. Perfect for those times when you want privacy. Silent mode can be controlled by an external switch (not included) or via your PC or Mac.
Firmware Updates
When you buy a WatchMate XB-6000, you get an extendable AIS platform. Designed to be compatible with a continuous stream of feature updates, your WatchMate XB-6000 can be upgraded with the latest firmware via USB and your computer.
